Home / Harley Davidson / Harley-Davidson 1000 Mile service how-to.

Harley-Davidson 1000 Mile service how-to.

Any vehicle requires regular service for it to run properly. The motorcycle giant Harley Davidson is no exception to this rule. The company encourages the Harley Davidson 1000 mile service which should be followed by all the Harley motorcycles to ensure a smooth ride. Doing regular maintenance and lubrication to the motorcycles will make sure, it will run properly and will not cause any unwanted trouble. The factory service outlets use the top technologies and the latest diagnostic tools in order to find out all the issues in the motorcycle during the Harley Davidson 1000 mile service. They will not only notify the issues but will also sort it out making the motorcycle run properly for a longer period of time.

During the Harley Davidson 1000 mile service the engine oil and the filter should be changed. There should also be an inspection of oil lines and also the brake system for any kind of leaks. There should be an inspection of the air cleaner and a service for the same will be required. The tire pressure should be checked and the tread should be inspected. Also, the tightness of the wheel spokes should be analyzed. The transmission lubricant should always be replaced when the time arrives. The clutch adjustment should also be checked with. The primary chain adjustment should be inspected.

The rear belt and sprockets along with the belt should be adjusted. While the Harley Davidson 1000 mile service is performed, the brake enriches and clutch controls should be checked with and any required adjustments should be made even with the lube throttle. The lube jiffy stand should be inspected. The fuel valve and lines need to be inspected for any kind of leaks and also the fittings. The fluid levels and the condition of the brake should be checked with. Along with this the brake pads and discs need to be checked for any wear and tear. The spark plugs are also an important element which should be inspected.

The electrical equipment present in the motorcycle along with switches should be checked if it is operating properly. The engine idle speed needs to be checked and realigned if necessary. When the Harley Davidson 1000 mile service is performed the steering hand bearings should be adjusted. The shock absorbers should also be inspected. The tightness of the critical fasteners should be checked with. The factory approved methods for the service will ensure that the motorcycle will run smoothly for a long period of time.

About admin1

Check Also

Harley-Davidson restarting production, bringing hundreds back to work

Harley-Davidson Inc. has resumed production at its U.S. manufacturing plants, with full staffing expected at …

Leave a Reply

Your email address will not be published. Required fields are marked *